25% Instant Savings Off All Blinds & Shades!
No minimum. No coupon required. Ends 3/30.
 |
 |
 |
YourBlinds Washington Sheer Horizontal Shadings - Beach House
Washington Sheer Horizontal shadings combine innovative design with style and versatility to simplify your life and your surroundings. Soft 2 1/2" vanes are suspended between two sheer fabric facings. With the shading lowered, the vanes can be tilted to any position, from fully open to closed. With the shadings raised, the fabric is concealed in the headrail.
The Beach House style features summery vane colors with a twill pattern.
Product Options- Motorization
|
|
Order Color Swatches
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Options and Specifications
|
Standard Washington Sheer Horizontal Shade An elegant, graceful shade for any window Width: 12.5" - 109" Length: 16" - 120" Inside mount: 1" min depth needed for shallow mount 1 1/4" min depth needed with back cover Inside mount flush with wall: 3 1/4" min depth needed 3 1/2" min depth needed with back cover Side mount: 1 1/4" min depth needed (max shade width with side mount is 48") Outside mount: 1 1/8" min surface height needed [Top] |
|
|
Sheer Horizontal Shade w/Motorization Easily raise and lower your shades with a remote control. Width: 19" - 102" Length: 12" - 120" Max Heights: · Up to 66" W x 120" H · 72" W x 102" H · 78" W x 84" · 84" W x 72" H · 90" W x 60" H · 96" W x 54" H · 102" W x 42" H Inside mount: 1 3/4" min depth needed with built-in battery wand and back cover Inside mount flush with wall: 3 3/4" with built-in battery wand and back cover Outside mount: 1" min surface height needed Outside Mount: Recommended width overlap per side 3" Inside and Outside mount minimum rear fabric clearance: 1/8" [Top] |
|
Ordering Tips
Ordering Tips
- Braided polyester loop cord
- OPTIONS (no upcharge):
- Optional Dust Cover
- Attaches to the top of the headrail
- Protects the fabric and internal operating mechanisms from dust, dirt and other contaminants
- Considerations:
- Inside Mount: Not available with inside mounted shades
- Outside Mount: Entire cover is used
- Optional Back Cover (click to view)
- Used with inside mounts when you want to conceal the open rear side of the headrail for a more pleasing exterior look.
- The back cover and its brackets add 1/4" additional space to mounting depth. Be sure to consider this in your calculations if you plan to request this.
- Optional Dust Cover
- Adjacent Shadings:
- To span wide window openings, Washington Sheer Horizontals may be
installed adjacently, so their headrails but together. The gap
between the fabric panels of the adjacent shadings varies according to
the control placement as follows:
- Right/Right controls 3/4" center gap
- Left/Left controls 3/4" center gap
- Right/Left controls 1 1/32" center gap
- Left/Right controls 1/2" center gap
- Washington Sheer Horizontal shadings are not recommended for bay windows or but-and-pass applications.
- To span wide window openings, Washington Sheer Horizontals may be
installed adjacently, so their headrails but together. The gap
between the fabric panels of the adjacent shadings varies according to
the control placement as follows:
- Vane Operation
- Closure - When the vanes of a Washington Sheer Horizontal shading are closed, they overlap each other, blocking the view. However, the vanes do not contact each other along the full length of the shading; they do not form a perfect seal against light leakage. This is most visible toward the bottom of the shading.
- Vane closure is measured as the distance between the front and rear fabric facings 6" up from the lowest point of the bottom rail, with the shading fully lowered and the vanes closed.
- The vane closure for Washington Sheer Horizontal shadings is 5/8" for shadings under 96" in height and 7/8" for shadings over 96" in height.
- Factory deductions (the factory will deduct the following in
production):
- Inside mount:
- Headrail: - 3/16 from ordered width
- Fabric: - 1" from ordered width (to accomodate lift cording)
- Shading Height: -1/8"
- Outside mount:
- Headrail: no deduction from ordered width
- Fabric: - 3/4" from ordered width (to accomodate lift cording)
- Shading Height: -1/8"
- End mount
- Headrail: - 11/16" from ordered width
- Fabric: -1 1/2" from ordered width (to accomodate lift cording)
- Shading Height: -1/8"
- Finished width and length may vary by plus or minus 1/8"
- Inside mount:
Benefits
- Adds visual elegance to your windows
- Provides view and privacy
- Keep your view and still feel the breeze
- Smooth, quiet shade operation
- Minimal light leakage on shading sides and above the headrail for increased privacy
More Information
Detailed information
Washington Sheer Horizontal shadings combine innovative design with style and versatility to simplify your life and your surroundings. Soft 2 1/2" vanes are suspended between two sheer fabric facings. With the shading lowered, the vanes can be tilted to any position, from fully open to closed. With the shadings raised, the fabric is concealed in the headrail.The Beach House style features summery vane colors with a twill pattern.Motorization
