Shade Colors

Options/Specifications

		Basic Designer Room Darkening Roller Shade A durable, reliable basic shade with a classic look and traditional feel that will enhance the beauty of your home, making it your showpiece. Width: 12" - 78" Length: 21" - 120" For Shades Up To 72" x 72": Inside Mount Min: 1 3/4" - Flush Mount Min Depth: 2" min - Outside Mount Min Flat Vertical Surface: 1 3/4". For Shades Over 72" x 72": Inside Mount: 2 3/4" - Flush Mount Min Depth: 2 3/4" min - Outside Mount Min Flat Vertical Surface: 2 3/4". Finished Dimension Allowances Fabric and Tube (All allowances are taken from ordered dimensions and may vary slightly): For Shades Up To 72" x 72": Inside Mount: -1 1/4" Outside Mount: -1 1/8". For Shades Over 72" x 72": Inside Mount: -1 3/8" Outside Mount: -1 1/4".  [Top]
		Shade with Faux Wood Slat For a sleek design, use a faux wood slat as a finishing touch. The faux wood slat replaces the standard bottom bar. Width: 12" - 78" Length: 21" - 120" For Shades Up To 72" x 72": Inside Mount Min: 1 3/4" - Flush Mount Min Depth: 2" min - Outside Mount Min Flat Vertical Surface: 1 3/4". For Shades Over 72" x 72": Inside Mount: 2 3/4" - Flush Mount Min Depth: 2 3/4" min - Outside Mount Min Flat Vertical Surface: 2 3/4". Finished Dimension Allowances Fabric and Tube (All allowances are taken from ordered dimensions and may vary slightly): For Shades Up To 72" x 72": Inside Mount: -1 1/4" Outside Mount: -1 1/8". For Shades Over 72" x 72": Inside Mount: -1 3/8" Outside Mount: -1 1/4".  [Top]
		Shade with Designer Tape Trim Add a designer tape trim to the bottom of the shade for just a hint of color or a bold contrast. The designer tape trim replaces the standard bottom bar. Width: 12" - 78" Length: 21" - 120" For Shades Up To 72" x 72": Inside Mount Min: 1 3/4" - Flush Mount Min Depth: 2" min - Outside Mount Min Flat Vertical Surface: 1 3/4". For Shades Over 72" x 72": Inside Mount: 2 3/4" - Flush Mount Min Depth: 2 3/4" min - Outside Mount Min Flat Vertical Surface: 2 3/4". Finished Dimension Allowances Fabric and Tube (All allowances are taken from ordered dimensions and may vary slightly): For Shades Up To 72" x 72": Inside Mount: -1 1/4" Outside Mount: -1 1/8". For Shades Over 72" x 72": Inside Mount: -1 3/8" Outside Mount: -1 1/4".  [Top]
		Shade with Large Cassette Give your shades a clean, sleek look with a fabric-wrapped cassette to cover the fabric roll Width: 12" - 78" Length: 21" - 96" Large Cassette Required for Shades Greater than 72" x 72". Inside Mount Min: 2 1/2" - Flush Mount Min Depth: 4 1/4" Outside Mount Min Flat Vertical Surface: 4". Finished Dimension Allowances Inside Mount: Fabric and Tube Width: -1 5/8" Cassette Profile Width: -1/2" Finished Width: -1/8" Finished Dimension Allowances Outside Mount: Fabric and Tube Width: -1 1/2" Cassette Profile Width: -3/8" Finished Width: Ordered Width. (All allowances are taken from ordered dimensions and may vary slightly)  [Top]
		Shade with Cordless Lifting System Rest easy knowing your children and pets are free from the dangers that cords might pose. Width: 16" - 78" Length: 23" - 108" Maximum height varies for cordless system shades narrower than 30 1/8", as follows: - 16" to 21 1/2" W: Max 55" H - 21 5/8 to 24" W: Max 72" H - 24 1/8" to 30" W: Max 84" H - 30 1/8" to 78" W: Max 108" H Inside Mount Min: 1 5/8" - Flush Mount Min Depth: 1 3/4" Outside Mount Min Flat Vertical Surface: 1 3/4". Finished Dimension Allowances Fabric and Tube Width (All allowances are taken from ordered dimensions and may vary slightly): Inside Mount: -1 3/4" Outside Mount: -1 5/8"  [Top]
		Shade with Cordless Cassette Lifting System Rest easy knowing your children and pets are free from the dangers that cords might pose. Also gives your shades a clean, sleek look with a fabric-wrapped cassette to cover the fabric roll. Width: 16" - 78" Length: 23" - 72" Maximum height varies for cordless cassette system shades narrower than 24", as follows: - 16" to 21 1/2" W: Max 55" H - 21 5/8 to 24" W: Max 72" H Inside Mount Min: 2 1/2" - Flush Mount Min Depth: 4 1/4" Outside Mount Min Flat Vertical Surface: 4". Finished Dimension Allowances Inside Mount: Fabric and Tube Width: -1 7/8" Cassette Profile Width: -1/2" Finished Dimension Allowances Outside Mount: Fabric and Tube Width: -1 3/4" Cassette Profile Width: -3/8" (All allowances are taken from ordered dimensions and may vary slightly)  [Top]

Ordering Tips

Features
Minimum & Maximum Shade Sizes
Factory Deductions
Mounting Requirements
Benefits
Care & Warranty Info

 

Features

• Standard Clutch - Continuous bead loop chain:
  • The bottom rod is wrapped in fabric for a smooth, finished look.
  • The bottom rod contains an adjustable weight, so the shade always remains perfectly balanced.
  • Faux Wood Slats or Designer Tape trims are available in place of the standard bottom bar.
  • Choice of Left or Right side control.
  • Choice of standard or reverse roll    Click to see picture
    • Standard roll - If you have no obstacles like trim to go over for proper shade operation, order standard roll.
    • Reverse roll - If you have obstacles like trim to mount the shade over, order reverse roll to give added clearance.
      
      

• Cassette System - available on all Designer Roller fabrics to provide a more finished look to the traditional roller shade.  No longer do you need to see the hardware and the roll.  Click to View
• Large cassette comes on shades larger than 72" w x 72" h.
• Large cassette required for Cordless Cassette Lifting System.
• NOTE:  If one or more of your shades will require the large cassette, we highly recommend ordering the large cassette on all the shades in the same room for consistency of look.
• Reverse roll not available with Cassette System
.
• Small Cassette System available only with continuous bead loop chain and comes on shades smaller than 72" w x 72" h.
• Fabric-wrapped cassette is standard.  Non fabric-wrapped cassette available upon request.
• Designer Roller shades may NOT be retrofitted with Cassette System.
  
  
• Cordless Lifting System:
  • Spring-assist roller.
  • Available in Standard Roll only, not available in Reverse Roll.
  • Cordless shades mounted side-by-side may not "stop" at the same height when installed.  However, the "stop" height is adjustable by rotating the built-in dial control located on the right side of the shade.
  • Beveled decorative pull available in one of five finishes.
  • Decorative Pull only available with the standard bottom bar.
  • Faux Wood Slats or Designer Tape trims are available in place of the standard bottom bar.
    
    
• Cordless Cassette Lifting System:
  • Large Cassette required for the Cordless Cassette Lifting System.
  • All other features of Cordless Lifting System available with Cordless Cassette Lifting System.

  [ Top ]
  

Minimum & Maximum Shade Sizes

• Standard Clutch - bead chain loop:
  • Minimum shade width: 12"
  • Maximum shade width: 120"
  • Minimum shade height: 21"
  • Maximum shade height: 120"
    
    

• Standard Cassette:
  • Minimum shade width: 12"
• Maximum shade width: 78"
• Minimum shade height: 21"
• Maximum shade height: 96"
NOTE: Standard Clutch and Standard Cassette Shades may vary in Max Width sizes.  The max width for each type of fabric can be found with the fabric color.

 

• Cordless Lifting System:
  • Minimum shade width: 16"
• Maximum shade width: 78"
• Minimum shade height: 23"
• Maximum shade height: 108"
NOTE: Cordless Lifting System Shades 16" to 21 1/2" wide have a maximum height of 55"; shades 21 5/8" to 24" wide are available to 72" in height; shades 24 1/8" to 30" wide are available to 84" in height; shades 30 1/8" to 78" wide are available to 108" in height.


• Cordless Cassette Lifting System:
  • Minimum shade width: 16"
• Maximum shade width: 78"
• Minimum shade height: 23"
• Maximum shade height: 72"
NOTE: Cordless Cassette Lifting System Shades 16" to 21 1/2" wide have a maximum height of 55"; shades 21 5/8" to 24" wide are available to 72" in height.

[ Top ]

Factory deductions - All allowances are taken from ordered dimensions and may vary slightly.

• Standard Clutch - Bead Loop Chain factory deductions from ordered width:
  • For Shades Up To 72" x 72" Inside Mount: -1 1/4" Outside Mount: -1 1/8".
  • For Shades Over 72" x 72" Inside Mount: -1 3/8" Outside Mount: -1 1/4".
  
  
• Small Cassette factory deductions from ordered width: 
  • Fabric and Tube Width - Inside Mount: -1 1/2" Outside Mount: -1 3/8"
  • Cassette Profile Width - Inside Mount: -1/2" Outside Mount: -3/8"
  • Finished Width - Inside Mount: -1/8" Outside Mount: Ordered Width.
• Large Cassette factory deductions from ordered width: 
  • Fabric and Tube Width - Inside Mount: -1 5/8" Outside Mount: -1 1/2"
  • Cassette Profile Width - Inside Mount: -1/2" Outside Mount: -3/8"
  • Finished Width - Inside Mount: -1/8" Outside Mount: Ordered Width.
    
    
• Cordless Lifting System factory deductions from ordered width:
  • Inside Mount: -1 3/4"<br>Outside Mount: -1 5/8"
    
    
• Cordless Cassette Lifting System factory deductions from ordered width: 
  • Fabric and Tube Width - Inside Mount: -1 1/2" Outside Mount: -1 3/8"
  • Cassette Profile Width - Inside Mount: -1/2" Outside Mount: -3/8"
  • Finished Width - Inside Mount: -1/8" Outside Mount: Ordered Width.

[ Top ]

Mounting requirements:

• Standard Clutch - Bead Loop Chain:
  • For Shades Up To 72" x 72":
    • Inside Mount: 1 3/4"
    • Flush Mount Min Depth: 2" min
    • Outside Mount Min Flat Vertical Surface: 1 3/4"
  • For Shades Over 72" x 72":
    • Inside Mount: 2 3/4"
    • Flush Mount Min Depth: 2 3/4" min
    • Outside Mount Min Flat Vertical Surface: 2 3/4"
  
  
• Small Cassette: 
  • Inside Mount: 2 1/2"
  • Flush Mount Min Depth: 3 1/4" min
  • Outside Mount: 2 3/4"
• Large Cassette: 
  • Inside Mount: 2 1/2"
  • Flush Mount Min Depth: 4 1/4" min
  • Outside Mount: 4"
    
    
• Cordless Lifting System: 
  • Inside Mount: 1 5/8"
  • Flush Mount Min Depth: 1 3/4" min
  • Outside Mount: 1 3/4"
    
    
• Cordless Cassette Lifting System: 
  • Inside Mount: 2 1/2"
  • Flush Mount Min Depth: 4 1/4" min
  • Outside Mount: 4"
    

[ Top ]

Benefits

• Beautiful and functional
• Shades stop and start easily and precisely
• Will raise and lower without fraying the edges

[ Top ]

More Information

• Limited Lifetime Warranty
• Care and Cleaning

[ Top ]

Detailed Info

The traditional window shade, with its simplicity of form, is a classic. These fabrics are timeless choices that can stand alone or work well with top treatments and draperies. Now, Hunter Douglas has taken this popular and practical window fashion a step further with the latest in technology and fabrics.

Unlike the window shades of yesteryear, Hunter Douglas Window Shades are fine custom window treatments that operate with precision. The shades move easily, starting or stopping with the touch of a cord (Bead Loop Chain). Designer Roller Shades are also available with the cordless option, the safest window treatment for homes with children and pets.

Choose a Faux Wood Slat to add an organic element or a Designer Tape Trim to add color and detail creating a striking accent.

Hunter Douglas window shades are as beautiful as they are functional.

Available Options: Designer Tape Trim, Faux Wood Slat Trim, Cassette Roll Cover, Cordless

Reviews