FREE
Samples
FREE
Shipping
NO
Sales Tax*
100%
Satisfaction
Significantly better than the average faux wood blind, that's Levolor's NuWood. Levolor NuWood Blinds utilize a high-tech, composite formula that combines wood with PVC to make these blinds lighter and stronger than the average faux wood blind for greater durability, so they look great for years to come. Because the slats are lighter, you do not have to pull as hard to raise and lower these compared with the average faux wood blind. As well, because the slats are stronger, they require fewer ladders to support the slats - fewer ladders means greater view out your window. And the colors - they look so close to real wood you'll swear they are!
NuWood Composite Blinds are ideal for areas with intense sun exposure and high humidity. NuWood Blinds are dust and scratch resistant, and easy to clean! Levolor Wood blinds carry a lifetime limited warranty.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The look and warmth of real wood with the performance of advanced materials and technology
Inside mount: 3/4' min depth needed
Inside mount flush with wall: 2 1/2' min depth needed
Outside mount: 1 1/2' height needed
Inside mount deduction: -1/2' from ordered headrail width, 1/2' from slat ordered width
Outside mount: -1/4' from ordered headrail width, +1' to valance ordered width
Accent and coordinate with your upholstery while increasing privacy
Inside mount: 3/4' min depth needed
Inside mount flush with wall: 2 1/2' min depth needed
Outside mount: 1 1/2' height needed
Inside mount deduction: -1/2' from ordered headrail width, 1/2' from slat ordered width
Outside mount: -1/4' from ordered headrail width, +1' to valance ordered width
No holes through the slat means enhanced privacy no more dots of light on monitors and TVs
Inside mount: 3/4' min depth needed
Inside mount flush with wall: 2 1/2' min depth needed
Outside mount: 1 1/2' height needed
Inside mount deduction: -1/2' from ordered headrail width, 1/2' from slat ordered width
Outside mount: -1/4' from ordered headrail width, +1' to valance ordered width
| 2" NuWood | Inside Mount | Outside Mount | ||
| Min Width | Max Width | Min Width | Max Width | |
| Tilt & Lift Controls- Opposite Side | 10 1/4" | 96 1/2" | 10" | 96" |
| Tilt Control in Center; No Lift Control | 9 1/2" | 10 1/4" | 9 1/4" | 10" |
| No Tilt & Lift Controls; Slats in Open Position | 6 7/8" | 9 1/2" | 6 5/8" | 9 1/4" |
Benefits
More Information
